MVC-0405

Marpa Vacuum MVC series pumps operate on the principle of two single-stage rotary pistons. Two rotating pistons rotate in opposite directions inside the pump.

The special geometrical shape of the claws allows the suctioned air to be compressed inside the vacuum pump.

As the rotors rotate, the air is drawn in through the suction port, compressed in the compression chamber and then expelled through the exhaust.

The non-return valve, fitted as standard on the suction port, prevents air from flowing back into the vacuum chamber when it is not moving.

Claw vacuum pumps are directly driven by a flanged motor, and the two pistons are synchronised by gears.

Gear oil is used to lubricate the claws.

Both the claws and the compression chamber are coated with TFE (Teflon) to protect the pump against corrosion from any gases sucked into the pump.

Precio: A consultar

Large discounts may apply. Find out more!

Request information

Product dimensions / photographs

Click to enlarge dimensional diagrams or images of the product.

Dimensions

DimensionsLWHABCDEFGIJMQ
MVC-04051065/11058567521795022223064603901786953"3"M12 Tap

Data Sheet

Click to enlarge dimensional diagrams or images of the product.

Technical dataUnits50 Hz 60 Hz
Flow rate/volume flowm3/h 400480
Ultimate pressurembar50 50
Ultimate vacuum at continuous operationmbar180 a atm. 180 a atm.
Motor powerKw. 7,59
Nominal motor speedrpm2850 3450
Noise leveldB(A) 78 80
Oil tank capacityLt 1,8 1,8
Weight approx.Kg364 371
Permissible ambient temperatureºC 5-40 5-40
Gas inletG(BSP) 3” 3”
Gas outletG(BSP) 3” 3”

User benefits

The strengths of this product over others with similar features are:

We’ll contact you in 24–48 hours
Request information on MVC-0405

Get major discounts on the listed price if you contact us now through this form. You can also call us on +34 937 841 268.

We’ll contact you in 24–48 hours

If you prefer, call us on 937 841 268 or 636 06 22 88, and we will handle your case immediately. We will ask you about your operations, your budget, your priorities, etc. before assigning you a specialist.

We’ll arrange a visit to your facilities

If you already know the pump you need, and if we have it in stock, we will send it to you immediately; if you need advice, we will visit your facilities to offer you the best solution.

We’ll give you the best price, guaranteed

Because we are manufacturers, we can offer you the best quality with great discounts compared to website prices, whether you are an individual or a business.